Go Back

Board and Batten Dining Room Wall

How to install board and batten in a dining room in under 3 hours
Print Instructions

Equipment

  • Measuring tape
  • Saw (circular saw or miter saw)
  • Nail gun or hammer and nails
  • level
  • stud finder
  • Wood filler
  • Caulking
  • Paint and supplies

Supply List

  • MDF or wood of choice

Instructions : Step by Step

  • Measure the Wall: Measure the height and width of the wall where you want to install the board and batten.
  • Choose Your Boards: Choose the type of board you want to use. You can use wood boards or MDF.
  • Cut the Boards: Cut the boards to the desired length using a saw.
  • Install the Boards: Install the boards vertically onto the wall, leaving space between each board.
  • Install the Battens: Install horizontal battens over the seams where the boards meet. Nail the battens to the wall, making sure they are level.
  • Fill Holes: Fill nail holes with wood filler and sand smooth.
  • Paint or Stain: Paint or stain the wall to your desired finish.

Tips

  • Use a stud finder to locate and mark the studs on the wall before installation.
  • Use a level to ensure your boards are installed straight.
Author: Jessica Bruno
Cost: $20 a sheet